Always wanted to make your own concrete counter top or table out of real design concrete? This is now possible with a concrete package from High Design Holland! This is not a concrete mix of the DIY store but GFRC concrete of high quality and the concrete we use for our schemes. The packages have been carefully put together by us. The mix is provided with glass fibres as reinforcement, flows level in the formwork and has an ultra strong and tight end result.

 

Watch the instructional video on this page and read our blogs for getting advice and information. And, the High Design Holland concrete calculator allows you to easily calculate the exact amount of products/packages you need for your project. 

 

If you are going to work with concrete yourself, but you have any questions before or during your job, please contact us using the form below. We like to share our knowledge and will answer your question as soon as possible. as soon as possible.


Base pack GFRC

Base package for making a GFRC concrete countertop, dining table, coffee table, outdoor kitchen, wall panel, window sills and more! 

 

PACKAGE CONTENT

  • Good for 1.5 m2 for 18mm thick concrete or 1m2 for 27mm thick concrete. (calculator)
  • HDH SP (superplasticizer)  
  • HDH Cure (acrylic polymer)
  • AR glass fibres 13mm (reinforcement)
  • 250 grams black pigment
  • Step-by-step guide
  • Add yourself: 1 bag of sand and 1 bag of portland cement, available in every DIY store

€ 69,95

  • delivery time: 1-4 days | all EU countries

Deluxe package GFRC

Basic package for making a GFRC concrete countertop, dining table, coffee table, outdoor kitchen, wall panel, window sills and more! With this GFRC mix you can demold and finish you concrete countertop after two days.

 

CONTENTS PACKAGE

  • Good for 1.5 m2 with 18mm thick concrete or 1m2 with 27mm thick concrete (calculator)
  • HDH SP (superplasticizer)
  • HDH Cure (acrylic polymer)
  • AR glass fibers 13mm (reinforcement)
  • 250 grams of black pigment
  • HDH Impreg (coating for you concrete project)
  • Mold release wax
  • Sanding paper
  • silicone (for caulking the formwork)
  • Screws + torx bit
  • Microfibre cloths
  • Step-by-step guide
  • Expandable with 1 or more basic packages
  • Add yourself: 1 bag of sand and 1 bag of Portland cement, available in every hardware store

€ 119,95

  • available
  • delivery time: 1-4 days | all EU countries

With one of our packages you can now cast beautiful concrete projects yourself. The special glass fibres that are added to the concrete mix (GFRC) reinforce the concrete, making it very strong. Even stronger than concrete reinforced with steel! This allows you to cast concrete countertops of only 2.5 cm thick or window sills of only 1.8cm thick! 

 

Because the mix flows horizontally into the mold it has no air bubbles on the surface which gives you a very tight end result.

 

The package also includes a step-by-step manual explaining how to use the products. For more information you can contact us and we will be happy to answer all you questions. 

 

BELOW YOU CAN SEE AN INSTRUCTIONAL VIDEO AND SOME NICE END RESULTS FROM OUR CUSTOMERS



MAKE YOUR CONCRETE PROJECT A SUCCESS WITH THE FOLLOWING PRODUCTS

COSMO 2C PU concrete countertop sealer - Complete set

WHY COSMO FOR A CONCRETE COUNTER TOP?

  • BEST PROTECTION AGAINST STAINS
  • COFFEE AND RED WINE PROOF
  • FOOD SAFETY
  • UV-RESISTANT
  • SCRATCH-PROOF
  • PRESERVATION OF CONCRETE APPEARANCE

 

This complete set contains everything you need to directly protect your concrete countertop, table or sink from stains:

  • COSMO PRIMER (750 ml)
  • COSMO 2C PU (750 ml)
  • precision scale 
  • paint tray with roller holder
  • 4 coating rollers
  • microfiber cloth
  • tutorial

€ 129,95

  • delivery time: 1-4 days | all EU countries

AR glass scrim heavy duty

Alkali-resistant fibreglass mesh of extra heavy quality. This fiberglass mesh is used as extra reinforcement in large, long and/or thin concrete projects such as a long concrete countertop. The mesh is easily cut to size by scissors. Pour half of the concrete mix into the mold and place the mesh on to of it. Then pour the rest of the concrete into the mould.

  • mesh size: 7mm x 8mm
  • weight: 180gr per 1m2
  • width of roll: 1 m (length of whole roll 50m))

€ 49,95

  • delivery time: 1-4 days | all EU countries

Note: Please fill out the fields marked with an asterisk.

High design holland youtube
facebook high design holland
youtube high design holland
google reviews high design holland
concrete cooperation

BTW-ID: NL002118834B88 KVK:67680089